Special solutions
Multi-room interior
From cross-flow heat exchangers to additional hot water preparation
Perfect climate
Cooling and heating solutions
from TOSHIBA
Split air conditioning systems
as a special solution
Customized solutions and add-ons for efficient room heating or domestic hot water preparation.
Exhaust air valve kit
TEMPERATURE-CONTROLLED EXHAUST AIR
Valve kit for exhaust temperature control for integrating external DX heat exchangers into ventilation systems. The system requires master/follower control units and at least one PMV valve kit. For combination with VRF outdoor units from the MiNi-SMMS-e, SMMS-e, and SHRM-e model series.
Hot water module
HOT WATER PREPARATION UP TO +82°C
Using hot water preparation for high-temperature systems, highly efficient room heating or domestic hot water generation is possible. For combination with VRF outdoor units from the SHRM-e model series. Available with 14.0 kW output.
Hot water module SMMSu
ADDITIONAL HOT WATER PREPARATION
Using hot water preparation for low-temperature systems, highly efficient room heating or domestic hot water generation is possible. For combination with VRF outdoor units from the SMMS-e, SMMS-u, and SHRM-e model series. Available in two capacity sizes of 8.0 and 16.0 kW.
HRV heat exchanger
HIGHLY EFFICIENT FRESH AIR SUPPLY
Cross-flow heat exchanger for stand-alone operation or for integration into VRF systems. Enables heat recovery from the conditioned room air with an enthalpy exchange efficiency of up to 88%. Available in 9 performance sizes from 150 to 2000 m3/h.
HRV heat exchanger with DX-Register
HIGHLY EFFICIENT FRESH AIR SUPPLY
Cross-flow heat exchanger with DX coil for heating and cooling operation, for integration into VRF systems according to Selection Tool design software. Enables heat recovery from the conditioned room air with an enthalpy exchange efficiency of up to 86%. Available in three performance sizes from 500 to 1000 m3/h.
Valve kit 0–10 V
EXTERNAL POWER CONTROL
Valve kit for power control for integrating external DX heat exchangers into ventilation systems. Controls heating or cooling operation via a 0-10 V signal from the ventilation control as per the power requirement. System consists of a control unit and PMV valve kit. For combination with an 8 or 10 PS VRF outdoor unit from the SMMS-e model series.
Components for
multi-room air conditioning system
Dummy text: Would you like further information about possible components of or add-ons to your air conditioning system?
