Perfect climate
Cooling and heating solutions
from TOSHIBA
The new R32 dimension in
cooling and heating
If the capacity required exceeds the technical and financial limits of direct evaporation systems, then water-based systems are used. TOSHIBA, the market leader in Japan, is now launching its sophisticated HEAT PUMP / CHILLER with the environmentally friendly R32 refrigerant in Europe.
Universal Smart X (USX) units with a heat pump or cooling-only design not only impress with maximum operational safety and reliability, but also with a wide range of uses, their compact dimensions, an as yet unmatched energy efficiency in part load operation – and last but not least with an innovative sales concept.
- Proven since the 1990s, a consistent leading innovator
- Can be used for cooling and heating up to 25,600 kW
- Industry-leading operational safety and reliability thanks to 4 independent refrigerant circuits
R32 refrigerant
Chiller models in stock
Choose from 4 pre-configured models we have in stock and which cover a wide range of applications: Perfect for industry, process cooling and heating, air handling units (AHU), office buildings, hotels, hospitals, IT and data centers, technical cooling, malls, and much more.
200 kW
Cooling only
- Brine model
- Integrated pump 3.7 kW
- RUAGP561C3R8E
200 kW
Cooling only
- Water and brine model
- Integrated pump 2.2 kW
- RUAGP561C28E
200 kW
Heating and cooling
- Water and brine model
- Basic heating capacity
- Integrated pump 2.2 kW
- RUAGP561H28E
180 kW
Heating and cooling
- Water and brine model
- HiHeating capacity
- Integrated pump 2.2 kW
- RUAGP511F28E
The 8 smart features
... which always make TOSHIBA USX systems the best option.
The successful UNIVERSAL SMART X series of units was developed especially for the European market. Given the universal application and scalability of our combinable modules, rather than producing "built to order" systems with long delivery times, we can deliver even huge systems in short time scales.
X-frame chassis design
The distinct X-design optimizes air flow and takes up less installation space than conventional systems.
Operational safety and reliability
The 4-in-1-module concept translates into maximum reliability and redundancy.
Wide capacity range
Heating and cooling output of up to 25,600 kW can be combined in a modular fashion.
Twin-rotary compressor
Energy-efficient control in part load operation of up to 5% thanks to the tried-and-tested TOSHIBA twin-rotary compressor.
Harmonic suppression
The electric power input is reduced as standard for low investment and operating costs.
Available all year round
Standardized unit configuration ensures year-round availability from the warehouse in Vienna
WiFi connectivity
A simple app is available for monitoring mobile systems and energy.
Criteria for Universal Smart X product range
Chiller
Range of use
Basic 150 kW | 180 KW | 200 kW
Basic range of use 150 kW | 180 KW | 200 kW
Note 1: Supply water temperature no higher than 35°C in cooling mode and no lower than 20°C in heating operation is permitted up to 1 hour after start-up. The supply water temperature must then lie within the operating range after that. A bypass line should be used to regulate the temperature, if necessary.
Note 2: For heat pump models only. -20°C applies to 180 kW heating capacity.
Note 3: The hot water supply water temperature is restricted according to the outdoor air temperature.
HiHeating type 150 kW | 180 kW
HiHeating type range of use 150 kW | 180 KW
Note 4: The water temperature regulation range can be greater if the cooling load is low.
Note 5: The system capacity cannot be guaranteed for a -20°C and -25°C outdoor air temperature. Please note that the system capacity can be impaired by external factors (such as drifting snow, environmental influences, etc.) even if the outdoor
air temperature is within the operating range specified above.
Chiller
Capacity range
Modules and combinations
- USX single module: 150, 180, 200 kW
- USX group: up to 16 modules, up to 3.2 MW
- USX system: up to 8 groups, up to 25.6 MW
High
energy efficiency
Energy efficiency
- Extremely high full load and part load energy efficiency through the combination of R32 refrigerant with its low GWP value and recently developed DC inverter compressor.
- The 150 kW model is a top class energy-efficient model.
- Precise adaptation of the water volume to the required load by an internal pump module with variable bypass control for even greater system efficiency.
*Conditions:
Cooling EER flow 7°C, return flow 12°C, outside temperature 35°C
Heating COP flow 45°C, return flow 40°C, outside temperature 7°C DB, 8°C WB
TOSHIBA chillers – customized configuration made easy
A customized system design enables you to get the best out of your unit and adapt it perfectly to your requirements. Our specialist partners are experts in their field. They will be happy to help you to find the best configuration for your TOSHIBA chiller. Simply fill out our contact form or use our specialist partner search.
Find a specialist partner near you
Consulting
Cooling and heating solutions from TOSHIBA
